user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
Appendix B: AT-GS950/48PS Default Parameters
378
Security Model
v1 v1/v2c/v3
Security Level
NoAuthNoPriv NoAuthNoPriv/AuthNoPriv/AuthPriv
SNMP User/Group
User Name
Enabled Enabled/Disabled
Group Name
10 entries
-
SNMP Version v1 v1/v2c/v3
encrypted not checked not checked/checked
Auth-Protocol
MD5
MD5/SHA
Password
none
-
Priv-Protocol DES
DES/none
Password
none
-
SNMP/Community Table
Community Name
none
-
User Name (View
Policy)
none
-
SNMP/Trap Management
Trap
Enabled Enabled/Disabled
Host IP Address
0.0.0.0
IPv4 address in xxx.xxx.xxx.xxx format
SNMP Version v1 v1/v2c/v3NoAuthNoPriv/v3AuthNoPriv/
v3AuthPriv
Community Name/
User Name
none
-
Access Control Configuration
Classifier Index none 1 - 65535
Source MAC Address
none
xx:xx:xx:xx:xx:xx hex format
Source MAC Mask
Length
none
1 - 48
Table 12. AT-S111 Management Software Default Settings (Continued)
Parameter
AT-GS950/48PS
Default Setting
Specifications