user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B

Appendix B: AT-GS950/48PS Default Parameters
376
Storm Control
Threshold
Low High (2500 pps)
Medium (1000 pps)
Low (500 pps)
@ Packet size = 1518 Bytes
Ingress Rate Limiting
Bandwidth
64Kbps X rate limit where rate limit (1 - 15625)
Ingress Rate Limiting
Status
Disabled Enabled/Disabled
Egress Rate Limiting
Bandwidth
64Kbps X rate limit where rate limit (1 - 15625)
Egress Rate Limiting
Status
Disabled Enabled/Disabled
VLAN Mode All ports - 802.1Q Tagged
VLAN
802.1Q Tagged VLAN or
Port-Based VLAN on any port
Tagged VLAN ID none 2 - 4000
Tagged VLAN Name none 0 - 32 characters
Tagged Management
VLAN
Enabled on DefaultVLAN
Disabled on all other
VLANs
Always Enabled on Default/VLAN
Enabled/Disabled on all other VLANs
Port-Based VLAN
Index
none 1 - 52
Port-Based VLAN
Name
none 0 - 32 characters
Port-Based Port Not Member Group Member or Not Member for each port
Port Settings
PVID
1 1 - 4000
Port Settings
Acceptable Frame
Types
All All/Tagged/Untagged and Priority Tagged
Port Settings
Ingress Filtering
Enabled Enabled/Disabled
Forwarding Table
Learning Mode
IVL IVL/SVL
Private VLAN
Source Port
1
All, 1 - 48
Table 12. AT-S111 Management Software Default Settings (Continued)
Parameter
AT-GS950/48PS
Default Setting
Specifications