user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
Appendix B: AT-GS950/48PS Default Parameters
374
Restricted Role False True/False
Restricted TCN False True/False
Port State Ignore Enable/Disable/Ignore
Bridge/Trunk Config/Trunking
Trunk Status
Disabled Active/Passive/Manual/Disabled
Bridge/Trunk Config/LACP Group Status
System Priority
32768 32768
System ID
MAC Address of
AT-GS950/48PS switch
-
Port Priority 0 0 - 255
Bridge/Mirroring
Mirroring Status Disabled Enabled/Disabled
Mirroring Port -
All, 1 - 48
Ingress Mirrored Port
All, 1 - 48 All, 1 - 48
Egress Mirrored Port
All, 1 - 48 All, 1 - 48
Bridge/Loopback Detection
State Disabled Enabled/Disabled
Interval 2 seconds 1 - 32767 seconds
Recover Time 60 seconds 0 or 60 - 1000000
Port
All, 1 - 48
-
Loopback Detection
State
Disabled Enabled/Disabled
Table 12. AT-S111 Management Software Default Settings (Continued)
Parameter
AT-GS950/48PS
Default Setting
Specifications