user manual

Chapter 21: Security
278
The Dial-in User page is displayed. See Figure 110 on page 277.
3. In the list of dial-in users, highlight the user you want to modify.
The user’s information is displayed in fields above.
4. In the Password field, enter the new password.
5. In the Dynamic VLAN field, enter the new VID of the VLAN which you
want the user to access.
6. Click Apply.
7. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.
Delete a Dial-in User
To delete a dial-in user, perform the following procedure:
1. From the main menu on the left side of the page, select the Security
folder.
The Security folder expands.
2. From the Security folder, Dial-in User.
The Dial-in User page is displayed. See Figure 110 on page 277.
3. In the list of dial-in users, highlight the user you want to delete.
4. Click Delete.
The user name, password, and dynamic vlan are removed from the
Dial-in User page.
5. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.