user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
Chapter 20: Voice VLAN
266
8. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify OUI
Setting
To modify or delete an OUI, it must be first be deleted and then re-entered
by following the procedure in “Create OUI Setting” on page 265.
Delete OUI
Setting
To delete an OUI, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select Voice VLAN.
The Voice VLAN folder expands.
3. From the Voice VLAN folder, select Voice VLAN OUI Setting.
The Voice VLAN OUI Setting Page is displayed. See Figure 106 on
page 265.
4. To delete a specific OUI that had already been entered in the table at
the bottom of the page, click on Delete in the Action column of the
table. The specific OUI will be deleted from the table.
5. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.