user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
AT-GS950/48PS Switch Web Interface User’s Guide
241
Figure 93. Modify Policy Page
4. Change the parameters as required.
Note
See “Create Policy” on page 238 for the definitions of each
parameters.
5. Click Apply.
The modified Policy entry is displayed in the table at the bottom of the
page of the Create Policy page.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Delete Policy To delete a Policy entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access