user manual

Chapter 18: Access Control Configuration
222
2. From the Access Control Config folder, select Classifier.
An example of a classifier table entry on the Create Classifier page is
displayed in Figure 77.
3. From the Create Classifier page, identify which classifier that want to
modify and click the Modify
link in the Action column.
The Modify Classifier page is displayed in Figure 78.
Figure 78. Modify Classifier Page
4. Change the parameters as required.
Note
See “Creating a Classifier” on page 219 for the definitions of each
parameters.
5. Click Apply.
The modified classifier entry is displayed in the table at the bottom of
the page of the Create Classifier page.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Deleting a
Classifier
To delete a classifier entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.