user manual

AT-GS950/48PS Switch Web Interface User’s Guide
219
Classifier
The Create Classifier page allows you to specify packet settings for
filtering Ethernet traffic.
You can create, modify or delete a Classifier by following the procedures
in the following sections:
 “Creating a Classifier,” next
 “Modifying a Classifier” on page 221
 “Deleting a Classifier” on page 222
Creating a
Classifier
To create a classifier, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Classifier.
The Create Classifier page is displayed in Figure 76.
Figure 76. Create Classifier Page