User's Manual

ManualsBrandsAllied Telesis ManualsSoftwareSwitch AT-9000/28

211

212

213

214

215

216

217

218

219

220

Table Of Contents

Contents
Figures
Preface
- Document Conventions
- Downloading Management Software and Web-based Guides
- Contacting Allied Telesis
Chapter 1
AlliedWare Plus™ Version 2.1.2 Web Browser Interface
- Management Sessions
- Web Manager Accounts
Chapter 2
Starting a Management Session
- Starting a Web Management Session
- Selecting items from a Web Page
- What to Configure First
- Saving Your Changes
- Ending a Web Management Session
Chapter 3
Basic Switch Parameters
- Setting the System Date and Time
  - Setting System Time Manually
  - Setting An SNTP or NTP Server
- Setting a Telnet or SSH Server
- Setting a Remote Log Server
- Setting the Switch Information
- Setting the Configuration File
  - Displaying and Setting the Active Configuration File
  - Uploading a Configuration File
- Managing User Accounts
- Rebooting a Switch
- Upgrading the Software
- Returning the AlliedWare Plus Management Software to the Factory Default Values
- Displaying System Information
Chapter 4
Setting Port Parameters
- Displaying the Port Parameters
- Changing the Port Settings
- Displaying the Storm Control Settings
- Modifying the Storm Control Settings
Chapter 5
Setting Port Statistics
- Displaying Port Statistics
- Clearing Port Statistics
Chapter 6
Setting Port Mirroring
- Overview
- Displaying Port Mirroring Settings
- Assigning a Destination Port
- Assigning Port Mirroring Values
Chapter 7
Setting the Port Spanning Tree Protocol
- Overview
- Displaying Port Spanning Tree Protocol Settings
- Modifying Port Spanning Tree Protocol Settings
Chapter 8
Setting the MAC Address
- Displaying the MAC Address
  - Displaying the Unicast MAC Addresses
  - Displaying Multicast Addresses
- Assigning a MAC Address
  - Assigning an Unicast Address
  - Assigning a Multicast Address
- Deleting a MAC Address
  - Deleting a Unicast Address
  - Deleting a Multicast Address
Chapter 9
Setting LACP
- Overview
- Displaying LACP Trunks
- Adding an LACP Trunk
- Modifying an LACP Trunk
- Deleting an LACP Trunk
Chapter 10
Setting Static Port Trunks
- Overview
- Displaying Static Trunk Settings
- Adding Static Trunks
- Modifying the Static Trunk Settings
- Deleting Static Trunks
Chapter 11
Setting Port-based and Tagged VLANs
- Overview
- Displaying VLANs
- Adding an VLAN
- Modifying VLANs
- Deleting VLANs
Chapter 12
Setting Switch Spanning Tree Protocols
- Overview
- Displaying Switch Spanning Tree Protocol Settings
- Modifying Switch Spanning Tree Protocol Settings
Chapter 13
Setting Internet Group Management Protocol (IGMP) Snooping
- Overview
- Displaying and Modifying IGMP Snooping Configuration
- Clearing the Routers List
- Disabling IGMP Snooping
- Displaying the Routers List
- Displaying the Hosts List
Chapter 14
Setting MAC Address-based Port Security
- Overview
- Displaying the MAC Address-based Port Security Settings
- Modifying the MAC Address-based Port Security Settings
- Disabling MAC Address-based Port Security Settings
Chapter 15
Setting RADIUS and TACACS+ Clients
- Overview
  - Remote Manager Accounts
  - Configuring TACACS+ and RADIUS
- Selecting the Authentication Method
- Configuring the Authentication Server
  - Configuring a TACACS+ Server
  - Configuring a RADIUS Server
- Deleting an Authentication Server
Chapter 16
Setting 802.1x Port-based Network Access
- Overview
- Enabling 802.1x Port-based Authentication on the Switch
- Configuring 802.1x Port-based Authentication
- Displaying the 802.1x Authentication Port Settings
- Disabling 802.1x Port-based Authentication on the Switch
- Disabling 802.1x Port-based Authentication on a Port
Chapter 17
Setting IPv4 and IPv6 Management
- Overview
  - IP Management Guidelines
- Assigning an IPv4 Address
  - Assigning a Static IPv4 Address
  - Assigning an DHCP IPv4 Address
- Assigning an IPv6 Address
- Displaying IP Addresses
- Deleting IP Addresses
Chapter 18
Setting LLDP and LLDP-MED
- Overview
- Setting LLDP Locations
- Configuring LLDP and LLDP-MED
- Displaying LLDP Neighbor Information
- Displaying LLDP Statistics
- Displaying LLDP Locations
- Displaying LLDP and LLDP-MED Settings
- Disabling LLDP on the Switch
Chapter 19
Setting sFlow
- Overview
- Enabling sFlow on the Switch
- Configuring sFlow on a Port
- Specifying an sFlow Collector
- Displaying the sFlow Settings

AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide

219

 Management Address— Indicates the IP address of the local

LLDP agent. This is used to obtain information related to the local

device.

 Port Vlan— Indicates the VID of the VLAN in which the

transmitting port is an untagged member.

 Port and Protocol Vlans— Indicates whether the device supports

protocol VLANs and, if it does, the protocol VLAN identifiers. This

field is not supported on the AT-9000 switches.

 Vlan Names— Lists the names of the VLANs in which the

transmitting port is either an untagged or tagged member.

 Protocol Ids— List of protocols that are accessible through the

port, for instance:

- 9000 (Loopback)

- 0026424203000000 (STP, RSTP, or MSTP)

- 888e01 (802.1x)

- AAAA03 (EPSR)

- 88090101 (LACP)

- 00540000e302 (Loop protection)

- 0800 (IPv4)

- 0806 (ARP)

- 86dd (IPv6)

 MAC Phy Config— Indicates the speed and duplex mode of the

port and whether the port was configured with Auto-Negotiation.

 Power Management— Indicates the power via MDI capabilities of

the port.

 Link Aggregation— Indicates whether the port is capable of link

aggregation and, if so, whether it is currently a member of an

aggregator.

 Max Frame Size— Sends the maximum supported frame size of

the port. This field is not adjustable on the switch.

7. Click Apply.