User's Manual

AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
197
Deleting IP Addresses
To delete an IP address from the switch, choose on of the following
procedures:
 “Deleting an IPv4 Static Address” on page 197
 “Deleting an DHCP IPv4 Address” on page 197
 “Deleting an IPv6 Address” on page 198
Caution
Deleting the IP address assigned to the switch may cause you to
end the current login session and lose the connection to the web
browser. To reassign an IP address to the switch, you need to use
the Command Line Interface. See the AlliedWare Plus Management
Software Command Line Interface User’s Guide.
Deleting an IPv4
Static Address
To delete an IPv4 address, do the following:
1. Select the Management tab.
The Management tab is displayed. See Figure 64.
2. From the Management tab, select IP.
The IP Management Configuration page with the Static IP Address
field selected is displayed. See Figure 65 on page 191
3. Delete the IP address in the IP Address field.
4. Click Apply.
Deleting an
DHCP IPv4
Address
To delete an DHCP IPv4 address, do the following:
1. Select the Management tab.
The Management tab is displayed. See Figure 64 on page 190.
2. From the Management tab, select IP.
The IP Management Configuration page with DHCP IP Address
selected is displayed. See Figure 66 on page 193.
3. Select Static IP Address.