User's Manual

ManualsBrandsAllied Telesis ManualsSoftwareSwitch AT-9000/28

181

182

183

184

185

186

187

188

189

190

Table Of Contents

Contents
Figures
Preface
- Document Conventions
- Downloading Management Software and Web-based Guides
- Contacting Allied Telesis
Chapter 1
AlliedWare Plus™ Version 2.1.2 Web Browser Interface
- Management Sessions
- Web Manager Accounts
Chapter 2
Starting a Management Session
- Starting a Web Management Session
- Selecting items from a Web Page
- What to Configure First
- Saving Your Changes
- Ending a Web Management Session
Chapter 3
Basic Switch Parameters
- Setting the System Date and Time
  - Setting System Time Manually
  - Setting An SNTP or NTP Server
- Setting a Telnet or SSH Server
- Setting a Remote Log Server
- Setting the Switch Information
- Setting the Configuration File
  - Displaying and Setting the Active Configuration File
  - Uploading a Configuration File
- Managing User Accounts
- Rebooting a Switch
- Upgrading the Software
- Returning the AlliedWare Plus Management Software to the Factory Default Values
- Displaying System Information
Chapter 4
Setting Port Parameters
- Displaying the Port Parameters
- Changing the Port Settings
- Displaying the Storm Control Settings
- Modifying the Storm Control Settings
Chapter 5
Setting Port Statistics
- Displaying Port Statistics
- Clearing Port Statistics
Chapter 6
Setting Port Mirroring
- Overview
- Displaying Port Mirroring Settings
- Assigning a Destination Port
- Assigning Port Mirroring Values
Chapter 7
Setting the Port Spanning Tree Protocol
- Overview
- Displaying Port Spanning Tree Protocol Settings
- Modifying Port Spanning Tree Protocol Settings
Chapter 8
Setting the MAC Address
- Displaying the MAC Address
  - Displaying the Unicast MAC Addresses
  - Displaying Multicast Addresses
- Assigning a MAC Address
  - Assigning an Unicast Address
  - Assigning a Multicast Address
- Deleting a MAC Address
  - Deleting a Unicast Address
  - Deleting a Multicast Address
Chapter 9
Setting LACP
- Overview
- Displaying LACP Trunks
- Adding an LACP Trunk
- Modifying an LACP Trunk
- Deleting an LACP Trunk
Chapter 10
Setting Static Port Trunks
- Overview
- Displaying Static Trunk Settings
- Adding Static Trunks
- Modifying the Static Trunk Settings
- Deleting Static Trunks
Chapter 11
Setting Port-based and Tagged VLANs
- Overview
- Displaying VLANs
- Adding an VLAN
- Modifying VLANs
- Deleting VLANs
Chapter 12
Setting Switch Spanning Tree Protocols
- Overview
- Displaying Switch Spanning Tree Protocol Settings
- Modifying Switch Spanning Tree Protocol Settings
Chapter 13
Setting Internet Group Management Protocol (IGMP) Snooping
- Overview
- Displaying and Modifying IGMP Snooping Configuration
- Clearing the Routers List
- Disabling IGMP Snooping
- Displaying the Routers List
- Displaying the Hosts List
Chapter 14
Setting MAC Address-based Port Security
- Overview
- Displaying the MAC Address-based Port Security Settings
- Modifying the MAC Address-based Port Security Settings
- Disabling MAC Address-based Port Security Settings
Chapter 15
Setting RADIUS and TACACS+ Clients
- Overview
  - Remote Manager Accounts
  - Configuring TACACS+ and RADIUS
- Selecting the Authentication Method
- Configuring the Authentication Server
  - Configuring a TACACS+ Server
  - Configuring a RADIUS Server
- Deleting an Authentication Server
Chapter 16
Setting 802.1x Port-based Network Access
- Overview
- Enabling 802.1x Port-based Authentication on the Switch
- Configuring 802.1x Port-based Authentication
- Displaying the 802.1x Authentication Port Settings
- Disabling 802.1x Port-based Authentication on the Switch
- Disabling 802.1x Port-based Authentication on a Port
Chapter 17
Setting IPv4 and IPv6 Management
- Overview
  - IP Management Guidelines
- Assigning an IPv4 Address
  - Assigning a Static IPv4 Address
  - Assigning an DHCP IPv4 Address
- Assigning an IPv6 Address
- Displaying IP Addresses
- Deleting IP Addresses
Chapter 18
Setting LLDP and LLDP-MED
- Overview
- Setting LLDP Locations
- Configuring LLDP and LLDP-MED
- Displaying LLDP Neighbor Information
- Displaying LLDP Statistics
- Displaying LLDP Locations
- Displaying LLDP and LLDP-MED Settings
- Disabling LLDP on the Switch
Chapter 19
Setting sFlow
- Overview
- Enabling sFlow on the Switch
- Configuring sFlow on a Port
- Specifying an sFlow Collector
- Displaying the sFlow Settings

AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide

189

IP Management

Guidelines

See the following list for guidelines about assigning the switch a

management IPv4 or IPv6 address:

 You can assign the switch one IPv4 address and one IPv6 address.

 A management address must be assigned to a VLAN on the switch. It

can be assigned to any VLAN, including the default VLAN which has a

VID of 1. For background information on VLANs, see Chapter 11,

“Setting Port-based and Tagged VLANs” on page 127.

 If you assign both IPv4 and IPv6 addresses to the switch, you must

assigned them to the same VLAN.

 An IPv4 management address can be assigned manually or from a

DHCP server on your network. (To learn the switch’s MAC address, go

to the Dashboard page. See Figure 4 on page 23.)

 An IPv6 address must be assigned manually. The switch does not

support the assignment of an IPv6 management address from a DHCP

server.

 You must assign the switch a default gateway if the network devices,

such as syslog servers and Telnet workstations, are not members of

the same subnet as the management address. This IP address

designates an interface on a router or other Layer 3 device that

represents the first hop to the remote subnets or networks where the

network devices are located.

 The default gateway address, if needed, must be a member of the

same subnet as the management address.