User's Manual
Table Of Contents
- Contents
- Figures
- Preface
- Chapter 1
- AlliedWare Plus™ Version 2.1.2 Web Browser Interface
- Chapter 2
- Starting a Management Session
- Chapter 3
- Basic Switch Parameters
- Setting the System Date and Time
- Setting a Telnet or SSH Server
- Setting a Remote Log Server
- Setting the Switch Information
- Setting the Configuration File
- Managing User Accounts
- Rebooting a Switch
- Upgrading the Software
- Returning the AlliedWare Plus Management Software to the Factory Default Values
- Displaying System Information
- Chapter 4
- Setting Port Parameters
- Chapter 5
- Setting Port Statistics
- Chapter 6
- Setting Port Mirroring
- Chapter 7
- Setting the Port Spanning Tree Protocol
- Chapter 8
- Setting the MAC Address
- Chapter 9
- Setting LACP
- Chapter 10
- Setting Static Port Trunks
- Chapter 11
- Setting Port-based and Tagged VLANs
- Chapter 12
- Setting Switch Spanning Tree Protocols
- Chapter 13
- Setting Internet Group Management Protocol (IGMP) Snooping
- Chapter 14
- Setting MAC Address-based Port Security
- Chapter 15
- Setting RADIUS and TACACS+ Clients
- Chapter 16
- Setting 802.1x Port-based Network Access
- Chapter 17
- Setting IPv4 and IPv6 Management
- Chapter 18
- Setting LLDP and LLDP-MED
- Chapter 19
- Setting sFlow
Chapter 8: Setting the MAC Address
102
Deleting a MAC Address
To delete a MAC address from the MAC address table, see the following
procedures:
“Deleting a Unicast Address” on page 102
“Deleting a Multicast Address” on page 102
Deleting a
Unicast Address
To delete a unicast address or clear all static or dynamic unicast
addresses, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 32 on page 96.
2. Select Mac Table and then move the cursor to the right to select
Unicast.
The Unicast MACs page is displayed. See Figure 33 on page 97.
3. Do one of the following:
To clear all of the static unicast addresses in the MAC address
table, click Clear Static
.
To clear the dynamic unicast addresses in the MAC address table,
click Clear Dynamic
.
To delete a specific MAC address, click Delete next to the MAC
address that you want to delete.
Deleting a
Multicast
Address
To delete a multicast address or clear all static or dynamic multicast
addresses, do the following:
1. Select the Switching Tab.
The Switching Tab is displayed. See Figure 32 on page 96.
2. Select Mac Table and then move the cursor to the right to select
Multicast.
The Multicast MACs page is displayed. See Figure 34 on page 98.
3. Do one of the following:
To clear all of the static multicast addresses in the MAC address
table, click Clear Static
.
To clear all of the dynamic multicast addresses in the MAC
address table, click Clear Dynamic
.