Rapier Series Switches Data Specification

2 Patch Release Note
Patch 86253-03 for Software Release 2.5.3
C613-10382-00 REV B
Some of the issues addressed in this Release Note include a level number. This
number reflects the importance of the issue that has been resolved. The levels
are:
Features in 86253-03
Patch 86253-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.5.3, and the following enhancements:
When ports were added or removed as a range with the ENABLE IP IGMP
ALLGROUPS and DISABLE IP IGMP ALLGROUPS commands, port
values were interpreted as 2 separate ports. This issue has been resolved.
Features in 86253-02
Patch file details are listed in Table 2:
Patch 86253-02 includes the following enhancements and resolved issues:
It is now possible to prevent specified ports from acting as IGMP all-group
ports, and specify which ports are allowed to behave as all-group entry
ports. This is enabled with the ENABLE IP IGMP ALLGROUP command,
and disabled with the DISABLE IP IGMP ALLGROUP command.
For details, see “IGMP Snooping All-Group Entry” on page 5.
DHCP was offering network and broadcast addresses to clients. This issue
has been resolved.
Level 1 This issue will cause significant interruption to network services, and
there is no work-around.
Level 2 This issue will cause interruption to network service, however there
is a work-around.
Level 3 This issue will seldom appear, and will cause minor inconvenience.
Level 4 This issue represents a cosmetic change and does not affect network
operation.
PCR: 03816 Module: IPG Level: 2
Table 2: Patch file details for Patch 86253-02.
Base Software Release File
86s-253.rez
Patch Release Date
25-July-2003
Compressed Patch File Name
86253-02.paz
Compressed Patch File Size
190900 bytes
PCR: 03420 Module: IPG, SWI Level: 3
PCR: 03515 Module: DHCP Level: 3