Specifications
Table Of Contents
- Uplink Module Hardware Reference
- Copyright
- Contents
- Models Covered By This Reference
- Why You Should Read This Reference
- Where To Find More Information
- Compatible Switch Units
- Hardware Description
- Uplink Module Overview
- AT-A35/SX 1-port 1000BASE-SX (SC connector)
- AT-A35/LX 1-port 1000BASE-LX (SC connector)
- AT-A39 1-port 10/100/1000BASE-T (RJ-45 connector)
- AT-A40/SC 1-port 100BASE-FX Multimode Fibre (SC connector)
- AT-A40/MT 1-port 100BASE-FX Multimode Fibre (MT-RJ connector)
- AT-A41/SC 1-port 100BASE-FX Singlemode Fibre (SC connector)
- AT-A41/MT 1-port 100BASE-FX Singlemode Fibre (MT-RJ connector)
- Hardware Features Common To All Models
- Troubleshooting
- Port, Connector, and Cable Combinations
- Contacting Us
6 Uplink Module
C613-03026-00 REV F
Uplink Modules currently available are:
AT-A35/SX 1-port 1000BASE-SX (SC connector)
Figure 1: AT-A35-SX (SC) Uplink module.
AT-A35/LX 1-port 1000BASE-LX (SC connector)
Figure 2: AT-A35-LX (SC) Uplink module.
AT-A39 1-port 10/100/1000BASE-T (RJ-45 connector)
Figure 3: AT-A39-T (RJ-45) Uplink module.
• Early versions of the AT-A39/T operate at 1000 Mbps only
• 10/100/1000 Mbps operation is available only if the AT-A39/T Uplink
Module is installed in a Rapier G6, Rapier G6F or Rapier i model,
otherwise operation is fixed at 1000 Mbps
AT-A35/SX
1000BASE-SX/SC
LINK
DISABLED
ACTIVITY
CLASS 1
LASER PRODUCT
DO NOT STARE
INTO BEAM
RXTX
AT-A35/LX
1000BASE-LX/SC
LINK
DISABLED
ACTIVITY
CLASS 1
LASER PRODUCT
DO NOT STARE
INTO BEAM
RXTX
AT-A39/T
10 / 100 / 1000BASE-T
FULL DUP
1000M LINK 10 / 100M LINK
ACTIVITY
COL HALF DUP