Specifications

Switching delete stp vlan 8-99
Software Release 2.7.3
C613-03098-00 REV A
delete stp vlan
Syntax DELete STP=stp-name VLAN={vlan-name|2..4094|ALL}
where:
■ stp-name is a character string 1 to 15 characters long.Valid characters are
uppercase and lowercase letters, digits, the underscore, and the hyphen.
The stp-name cannot be all.
■ vlan-name is a unique name from 1 to 32 characters. Valid characters are
uppercase and lowercase letters, digits, the underscore, and the hyphen.
The vlan-name cannot be a number or all.
Description This command deletes one or all VLANs from the specified STP, and returns
the VLANs to the default STP. A VLAN cannot be explicitly deleted from the
default STP. The default VLAN cannot be deleted.
Ports in the VLAN may belong to only one STP after the deletion except for the
Rapier i Series switches.
On the Rapier i Series switches only, a port can belong to more than one STP
after deletion. When a port belongs to multiple VLANs in the same STP, the
port remains a member of this STP when a VLAN it was a member of is
returned to the default STP.
If as a result of the VLAN deletion, ports are moved from one STP to another
STP, the two affected STPs are initialised when they are currently enabled. Any
previously disabled ports in the STPs are enabled.
When returned to the default STP, the ports of the VLAN have the default STP
parameter values. The ports do not retain any non-default STP configuration
that was made when the VLAN was associated with any other STP.
The vlan parameter specifies the name or numerical VLAN Identifier (VID) of
the VLAN to be deleted. If all is specified, then all VLANs are deleted from the
STP.
Example To delete the Research VLAN from the company STP, use the command:
del stp=company vlan=research
Related Commands add stp vlan
show stp