Specifications

8-98 delete mstp msti vlan Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
delete mstp msti vlan
Syntax DELete MSTp MSTI=instance VLAN={vlan-name|vlan-list|ALL}
where:
■ instance is an instance number from 1 to 4094 for a specific MSTI.
■ vlan-name is a unique name for the VLAN, 1 to 15 characters in length.
Valid characters are uppercase letters (A-Z), lowercase letters (a-z), digits
(0-9) the underscore character ("_"), and the hyphen character (-). The
vlanname cannot be a number or ALL.
■ vlan-list is a VLAN number, a range of VLAN numbers (specified as n-m),
or a comma separated list of VLAN numbers and (or) ranges. VLAN
numbers start at 1 and end at 4094.
Description This command removes VLAN(s) from a specified MSTI. The removed VLANs
will be mapped to the CIST.
Once a VLAN is unmapped from a specified MSTI, the frames belonging to
that VLAN are not longer forwarded along the spanning tree associate with
that instance. The frames will be forwarded along the CIST spanning tree.
The msti parameter specifies the instance number of the specified Multiple
Spanning Tree Instance. Any VLANs that are not assigned to a specific MSTI
explicitly are mapped to the CIST by default. There is no command to remove
VLANs from the CIST.
The vlan parameter specifies the VLAN mapped to a specified MSTI. To un-
map a VLAN from an MSTI it must have previously been mapped to the MSTI.
If all is specified, all VLANs mapped to the MSTI will be unmapped and re-
mapped to the CIST.
Examples To delete the mapping of all VLANs from MSTI5, use the command:
del mst msti=5 vlan=all
Related Commands add mstp msti vlan
show mstp
show mstp msti