Specifications

Switching add vlan bridge 8-87
Software Release 2.7.3
C613-03098-00 REV A
add vlan bridge
Syntax ADD VLAN={vlan-name|1..4094} BRIDge
where vlan-name is a unique name for the VLAN 1 to 32 characters long. Valid
characters are uppercase and lowercase letters, digits, the underscore, and the
hyphen. The vlan-name cannot be a number or ALL.
Description This command enables bridging between switch ports that are members of the
specified VLAN, and a single virtual port configured on the bridge. Bridging
takes place when the VLAN is attached to the bridge, and has been configured
with a single virtual port. The VLAN can attach to only a single bridge.
Examples To attach the training VLAN to the bridge use the command:
add vlan=training bridg
Related Commands add bridge port in Chapter 16, Bridging
delete vlan bridge
enable bridge in Chapter 16, Bridging
show bridge in Chapter 16, Bridging
show vlan