Specifications

Switching show vlan debug 8-233
Software Release 2.7.3
C613-03098-00 REV A
show vlan debug
Syntax SHow VLAN DEBug
Description This command displays debug information for all VLANs (Figure 8-50 on
page 8-233, Table 8-67 on page 8-233).
Figure 8-50: Example output from the show vlan debug command
Examples To display debugging information for all VLANs, use the command:
show vlan debug
Related Commands disable vlan debug
enable vlan debug
Vlan Enabled Debug Modes Output Timeout
------------------------------------------------------------
Vlan1 PKT 16 NONE
------------------------------------------------------------
Vlan Enabled Debug Modes Output Timeout
------------------------------------------------------------
Vlan4060 None
------------------------------------------------------------
Table 8-67: Parameters in the output of the show vlan debug command
Parameter Meaning
VLAN String comprising the constant “Vlan” and the VLAN Identifier of
the VLAN.
Enabled Debug Modes Whether the debugging option for the VLAN is PKT or none.
Output Output device for the VLAN. This is shown when a debug mode is
enabled.
Timeout Seconds during which debugging options for the VLAN are
enabled. This is shown when a debug mode is enabled. If a timeout
value is not set, “None” is shown.