Specifications

Switching show switch hwfilter 8-219
Software Release 2.7.3
C613-03098-00 REV A
Example To display a summary of all filters, use the command:
sh swi hwf
To display details of the filter that uses classifier 1, use the command:
show swi hwf class=1
Related Commands add switch hwfilter classifier
delete switch hwfilter classifier
set switch hwfilter classifier
show classifier in Chapter 34, Generic Packet Classifier
Table 8-60: Parameters in the output of the show switch hwfilter classifier command
Parameter Meaning
Status Whether hardware filtering on the switch is enabled.
Number of Filter Current total of filters created with the add switch hwfilter
classifier command.
Filter Filter number.
Classifier Number of the classifier this filter entry is based on.
Action Action to take when a packet matches this entry; one or more of
“sp” (SETPRIORITY), “sc” (FORWARD or SENDCOS), “st” (SETTOS),
“dn” (DENY), “se” (SENDEPORT), “sm” (SENDMIRROR), “mpt”
(MOVEPRIOTOTOS) “mtp” (MOVETOSTOPRIO), “sds” (SETIPDSCP),
“sn” (SENDNONUNICASTTOPORT), “nd” (NODROP).
New IP DSCP New IP DSCP value to assign to packets matching the entry.
New TOS New TOS value to assign to packets matching the entry.
Port New output port to use for packets matching the entry.
Priority New priority value to assign to packets matching the entry.
No Match Action Action to take when a packet matches the specified ingress/egress
ports for this entry; one or more of “sp” (SETPRIORITY), “sc”
(FORWARD or SENDCOS), “st” (SETTOS), “dn” (DENY), “se”
(SENDEPORT), “sm” (SENDMIRROR), “mpt” (MOVEPRIOTOTOS)
“mtp” (MOVETOSTOPRIO), “sds” (SETIPDSCP), “sn”
(SENDNONUNICASTTOPORT).
No Match DSCP New IP DSCP value to assign to packets on a partial match.
No Match TOS New TOS value to assign to packets on a partial match.
No Match Port New output port to use for packets on a partial match.
No Match Priority New priority value to assign to packets on a partial match.