Specifications

8-210 show switch Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
Example To display the configuration of the switch module, use the command:
show switch
Related Commands reset switch
Uptime Time in hours:minutes:seconds since the switch was last
powered up, rebooted, or restarted. This is the same value
as the MIB object sysUpTime.
Uptime Time in hours:minutes:seconds since the switch was last
powered up, rebooted, or restarted. This is the same value
as the MIB object sysUpTime.
Table 8-55: Parameters in the output of the show switch command (Continued)
Parameter Meaning