Specifications
Switching show switch 8-209
Software Release 2.7.3
C613-03098-00 REV A
show switch
Syntax SHow SWItch
Description This command displays configuration information for the switch functions
(Figure 8-36 on page 8-209, Table 8-55 on page 8-209).
Figure 8-36: Example output from the show switch command
Switch Configuration
------------------------------------------------------------
Switch Address ............. 00-00-cd-04-e0-75
Learning ................... ON
Ageing Timer ............... ON
Number of Fixed Ports ...... 24
Number of Uplink Ports ..... 0
Mirroring .................. DISABLED
Mirror port ................ None
Ports mirroring on Rx ...... None
Ports mirroring on Tx ...... None
Ports mirroring on Both .... None
Number of WAN Interfaces ... 0
Name of Interface(s) ....... -
Ageingtime ................. 300
L3 Ageingtime .............. 900
UpTime ..................... 00:04:30
------------------------------------------------------------
Table 8-55: Parameters in the output of the show switch command
Parameter Meaning
Switch Address MAC address of the switch from which the Bridge
Identifier used in the Spanning Tree Algorithm is derived.
Learning Whether the switch’s dynamic learning and updating of
the forwarding database is enabled.
Ageing Timer Whether the ageing timer is enabled.
Number of Fixed Ports Number of fixed Ethernet switch ports.
Number of Uplink Ports Number of Ethernet uplink ports.
Mirroring Whether traffic mirroring is enabled.
Mirror port Switch port where mirror traffic is sent.
Ports mirroring on Rx Ports that are set to send all the traffic they receive to the
mirror port.
Ports mirroring on Tx Ports that are set to send all the traffic they transmit to the
mirror port.
Ports mirroring on Both Ports that are set to send all the traffic they both receive
and transmit to the mirror port.
Number of WAN Interfaces Total number of installed WAN interfaces.
Name of Interface(s) Name of the installed WAN interface(s).
Ageingtime Length in seconds after which a dynamic entry is removed
from the forwarding database.
L3 Ageingtime Length in seconds after which a dynamic entry is removed
from the Layer 3 forwarding database.