Specifications

8-204 show stp counter Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
Example To show the counters for all STPs, use the command:
SHOW STP COUNTER
Related Commands reset stp
show stp
show stp port
RST BPDU Number of valid Rapid Spanning Tree BPDUs transmitted
(rapid mode only).
Discarded
STP packets discarded.
Port Disabled Number of BPDUs discarded because the port that the
BPDU was received on was disabled.
Invalid Protocol Number of STP packets that had an invalid Protocol
Identifier field or invalid Protocol Version Identifier field.
Invalid Type Number of STP packets that had an invalid Type field.
Invalid Message Age Number of STP packets that had an invalid message age.
Config BPDU length The number of Configuration BPDUs that had an incorrect
length.
TCN BPDU length Number of Topology Change Notification BPDUs that had
an incorrect length.
RST BPDU length Number of Rapid Spanning Tree BPDUs that had an
incorrect length (rapid mode only).
Table 8-52: Parameters in the output of the show stp counter command (Continued)
Parameter Meaning