Specifications

Switching show mstp msti port 8-199
Software Release 2.7.3
C613-03098-00 REV A
Example To display the information of port 1 for MSTI5, use the command:
show mstp msti=5 port=1
Related Commands disable mstp
enable mstp
set mstp cist
set mstp cist port
Designated Bridge Either the unique Bridge Identifier of the switch, or
the unique Bridge Identifier of the switch believed to
be the Designated Bridge for the LAN to which the
port is attached.
Designated Port Port Identifier of the port on the Designated Bridge
through which the Designated Bridge transmits
Configuration BPDU information stored by this port.
Table 8-49: Parameters displayed in the output of the show mstp msti port command
Parameter Meaning