Specifications

8-188 show mstp Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
Figure 8-21: Example output from the show mstp configid command
Figure 8-22: Example output from the show mstp table command
Example To show information about MSTP, use the command:
show mstp
Related Commands enable mstp
disable mstp
create stp
destroy mstp msti
add mstp msti vlan
delete mstp msti vlan
set mstp
set mstp cist
set mstp msti
MST Configuration Identification
----------------------------------------------------------------------------------
Configuration Name ........................ mstRegion1
Format Selector ........................... 0
Revision Level ............................ 12
Configuration Digest ...................... AC36177F50283CD4B83821D8AB26D8AB
----------------------------------------------------------------------------------
Table 8-41: Parameters displayed in the output of the show mstp configid command
Option Description
Configuration Name The name of the MST region
MST Configuration Name A Configuration Identifier Format Selector
MST Revision Level The revision level of the MST region
Configuration digest A 16 octet signature of type HMAC-MID5 created from the MST Configuration
Tabl e
MST Configuration Table
----------------------------------------------------------------------------------
Multiple Spanning Tree Instance VLAN Members
----------------------------------------------------------------------------------
CIST 15-19,31-4094
MSTI 1 1,2,10,20-30
MSTI 2 3-9
MSTI 3 11-14
----------------------------------------------------------------------------------
Table 8-42: Parameters displayed in the output of the show mstp cist command
Option Description
Multiple Spanning Tree Instance The instance of a spanning tree, the instance is either a CIST or an MSTI
VLAN Members A list of the VLANs that are mapped to a specified MSTI