Specifications

8-184 show lacp port Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
Examples To show the LACP port information for all ports, use the command:
sh lacp po
Individual User-configurable setting that determines whether the port is an
individual. If no, the port may be aggregated; if yes, it is not
aggregated.
Synchronised If yes, the port is considered to be in a synchronised state—the port
has been correctly associated with an aggregator.
Collecting Whether this port has been enabled to receive packets.
Distributing Whether this port has been enabled to transmit packets.
Defaulted Whether this system is using defaults for the partner information. If
no, the values have been received from the partner via a LACPDU.
Expired The port has not received a frame from its partner for 3 times the
periodic time (3 or 90 seconds).
Actor Churn Whether churning of the actor port has been detected.
Partner Churn Whether churning of the partner port has been detected.
Partner Information Information that has been received about the partner port. The
partner port is the port on the connected device.
Partner System
Priority
Partner's system priority.
Partner System Partner's system identifier.
Port Key Partner port's key.
Port Priority Partner port's key priority.
Port Number Partner port's port number.
Mode Whether the mode is active or passive. If active, the partner port
sends LACPDU packets regardless of this port's participation. If
passive, the partner port sends LACPDU packets only after receiving
one from this port.
Periodic The setting of the partner port for the time period between
transmission of periodic LACPDU packets; one of "Fast" (1 second)
or "Slow" (30 seconds).
Individual The setting of the partner port determining whether the port is an
individual. If no, the partner port is not an individual and may be
aggregated; if yes, it cannot be aggregated.
Synchronised If yes, the partner system considers the partner port to be in a
synchronised port—the port has been correctly associated with an
aggregator; otherwise, no.
Collecting Whether the partner port has been enabled for receiving packets.
Distributing Whether the partner port has been enabled for transmitting packets.
Defaulted Whether the partner system is using the defaults for this port's
information. If no, the values have been received from this system via
a LACPDU. If yes, the defaults are still in use.
Expired When the partner port has not received a frame for 3 times the
periodic time (3 or 90 seconds).
Table 8-38: Parameters in output of the show lacp port command (Continued)
Parameter Meaning