Specifications

8-182 show lacp Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
show lacp
Syntax SHow LACP
Description This command displays the state of LACP on the switch.
Figure 8-16: Example output from the show lacp command
LACP Information
------------------------------------------------------------
Status .......................... Enabled
Actor System Priority ........... 80-00
Actor System .................... 00-3e-0a-12-00-01
LACP Ports ...................... 1-3,5,7,9-12
Active ........................ 1-3,5
Passive ....................... 7,9-12
Table 8-37: Parameters in output of the show lacp command
Parameter Description
Status Whether LACP is enabled.
Priority User-configurable priority of the system. This parameter is
concatenated with the Actor System parameter to generate the
Actor System ID.
Actor System MAC address of the local system.
LACP Ports A list of ports currently under LACP control.
Active A list of ports currently in LACP Active mode.
Passive A list of ports currently in LACP Passive mode.