Specifications

8-164 set switch ageingtimer Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
To set the port parameters for ports 1 to 10 in STP3 to their standard defaults,
use the command:
set stp=3 port=1-10 default
To set port 10 in STP3 as an edgeport, use the command:
set stp=3 port=10 edgeport=yes
To force port 10 in STP3 to be treated as if it were part of a point to point LAN
segment, use the command:
set stp=3 port=10 ptp=yes
Related Commands purge stp
reset stp
set stp
show stp
set switch ageingtimer
Syntax SET SWItch AGEingtimer=10..1000000
Description This command sets the threshold value, in seconds, of the ageing timer, after
which a dynamic entry in the Layer 2 forwarding database is automatically
removed. The maximum setting of 1 000 000 seconds is approximately 11 days
13 hours. The default is 300 seconds (5 minutes).
Example To set the ageing timer to 180 seconds (3 minutes), use the command:
set switch ageingtimer=180
Related Commands disable switch ageingtimer
enable switch ageingtimer
show switch