Specifications

8-160 set stp Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
To set the hello time to 3 seconds for the company STP, use the command:
set stp=company hellotime=3
To set the maximum age to 19 seconds for the company STP, use the command:
set stp=company maxage=19
To set the priority of the switch becoming the Root Bridge to 100 for the
company STP, use the command:
set stp=company priority=100
To set the Forward Delay to 12 seconds for all STPs, assuming the
forwarddelay-maxage criterion is met for all STPs, use the command:
set stp=all forwarddelay=12
To set the parameters for the company STP to their defaults, use the command:
set stp=company default
Related Commands purge stp
reset stp
set stp port
show stp