Specifications

8-144 reset stp Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
reset stp
Syntax RESET STP={stp-name|ALL}
where stp-name is a character string 1 to 15 characters long.Valid characters are
uppercase and lowercase letters, digits, the underscore, and the hyphen. The
stp-name cannot be all.
Description This command resets operation of the Spanning Tree Algorithm for the
specified STP, initialises all counters for the specified STP, and initialises all
timers on all ports that are members of the STP. Ports remain in the state they
were before the reset command was issued, for example, ports that were
enabled remain enabled, ports that were disabled remain disabled.
Example To reset the company STP, use the command:
reset stp=company
Related Commands purge stp
set stp
show stp
show stp counter
reset switch
Syntax RESET SWItch
Description This command resets the switch module. All dynamic switch information is
cleared. All ports are reset. All counters and timers are reset to zero.
Example To reset the switch module, use the command:
reset switch
Related Commands show switch
show switch fdb