Specifications

Switching reset mstp counter port 8-143
Software Release 2.7.3
C613-03098-00 REV A
reset lacp port counter
Syntax RESET LACP POrt[={port-list|ALL}] COUnter
where port-list is a port number, range (specified as n-m), or comma-separated
list of port numbers and/or ranges. Port numbers start at 1 and end at m,
where m is the highest numbered Ethernet switch port, including uplink ports.
Description This command resets all LACP counters for the specified switch ports.
The port parameter specifies the ports. If all is specified, all port counters in the
switch are reset. The default value is all.
Examples To reset the LACP counters for all ports, use the command:
reset lacp po cou
Related Commands purge lacp
show lacp port counter
reset mstp counter port
Syntax RESET MSTp COUnter POrt={port-list|ALL}
where port-list is a port number, range (specified as n-m), or comma-separated
list of port numbers and/or ranges. Port numbers start at 1 and end at m,
where m is the highest numbered Ethernet switch port, including uplink ports.
Description This command resets the counter value for a specified port or ports.
The port parameter specifies the ports. If all is specified, all port counters in the
switch are reset. The default value is all.
Example To enable all ports in MSTI5, use the command:
reset mstp counter port=1
Related Commands show mstp
show mstp cist port
show mstp msti port