Specifications

8-140 enable vlanrelay Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
enable vlanrelay
Syntax ENAble VLANRelay=name
where name is a unique name for the VLAN relay entity 1 to 15 characters long.
Valid characters are uppercase and lowercase letters, digits, the underscore,
and the hyphen.
Description This command enables the relaying of packets by the VLAN relay entity. The
relay entity must already exist and must be currently disabled. VLAN relay
entities are enabled by default upon creation.
Example To enable packet relaying by the VLAN relay entity SNARelay, use the
command:
enable vlanrelay=snarelay
Related Commands add vlanrelay
delete vlanrelay
disable vlanrelay