Specifications

Switching enable switch mirror 8-137
Software Release 2.7.3
C613-03098-00 REV A
enable switch learning
Syntax ENAble SWItch LEarning
Description This command enables the dynamic learning and updating of the forwarding
database. The default setting for the learning function is enabled.
Example To enable the switch learning function, use the command:
ena swi le
Related Commands disable switch learning
show switch
enable switch mirror
Syntax ENAble SWItch MIRRor
Description This command enables traffic mirroring on the switch. Mirrored traffic is sent
on the switch’s mirror port as long as a valid one is defined and sources of
mirror traffic have been configured. If a packet is Layer 3 switched and
mirrored, then the packet is always transmitted from the mirror port with a
VLAN tag. Four or more ports set to mirror traffic to the mirror port may
significantly reduce switch performance. The default state of mirroring is
disabled.
Example To enable traffic mirroring, use the command:
ena swi mirr
Related Commands disable switch mirror
set switch mirror
set switch port
show switch
show switch port