Specifications

8-136 enable switch hwfilter Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
enable switch hwfilter
Syntax ENAble SWItch HWFilter
Description This command enables hardware-based Layer 3 packet filtering.
Hardware filtering is automatically enabled when the first filter match is
added. This command may be used to re-enable filtering if it has been
temporarily disabled by the disable switch hwfilter command, or to enable
the filtering mechanism prior to the addition of the first filter match.
Example To enable existing hardware-based Layer 3 packet filters, use the command:
ena swi hwf
Related Commands disable switch hwfilter
show switch hwfilter
enable switch l3filter
Syntax ENAble SWItch L3Filter
Description This command enables hardware-based Layer 3 packet filtering.
On the Rapier i Series switch only, hardware filtering is automatically enabled
when the first filter match is added. However this command may be used to re-
enable filtering if it has been temporarily disabled by the disable switch
l3filter command, or to enable the filtering mechanism prior to the addition of
the first filter match.
Example To enable existing hardware-based Layer 3 packet filters, use the command:
ena swi l3f
Related Commands disable switch l3filter
show switch l3filter