Specifications

Switching enable switch ageingtimer 8-131
Software Release 2.7.3
C613-03098-00 REV A
enable switch ageingtimer
Syntax ENAble SWItch AGEingtimer
Description This command enables the ageing timer to age out dynamically learned entries
in the forwarding database. The default setting for the ageing timer is enabled.
If the ageing timer ages out all dynamically learned filter entries, and switch
learning is disabled, only statically entered MAC source addresses are used to
decide which packets to forward or discard. If the switch finds no matching
entries in the forwarding database during the forwarding process, then all
switch ports in the VLAN are flooded with the packet, except the port on
which the packet was received.
Example To enable the ageing of learned MAC addresses, use the command:
ena swi age
Related Commands disable switch ageingtimer
set switch ageingtimer
show switch