Specifications

Switching enable lacp 8-121
Software Release 2.7.3
C613-03098-00 REV A
disable vlanrelay debug
Syntax DISable VLANRelay=name DEBug
where name is a unique name for the VLAN relay entity 1 to 15 characters long.
Valid characters are uppercase and lowercase letters, digits, the underscore,
and the hyphen.
Description This command disables the output of debugging information about packets
relayed by a VLAN relay entity. The relay entity must already exist and VLAN
relay debugging must currently be enabled. Debugging of VLAN relay entities
is disabled by default.
Example To disable the display of packets relayed by the VLAN relay entity SNARelay,
use the command:
dis vlanr=snarelay deb
Related Commands add vlanrelay
delete vlanrelay
enable vlanrelay
enable vlanrelay debug
enable lacp
Syntax ENAble LACP
Description This command enables LACP on the switch. A notification message and a log
message file are generated when this command is executed. LACP is disabled
by default.
Related Commands disable lacp
show lacp