Specifications

8-118 disable switch learning Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
disable switch learning
Syntax DISable SWItch LEarning
Description This command disables the dynamic learning and updating of the forwarding
database. The default setting for the learning function is enabled.
If switch learning is disabled and the ageing timer has aged out all dynamically
learned filter entries, only MAC source addresses that are statically entered are
used to decide which packets to forward or discard. If the switch finds no
matching entries in the forwarding database during the forwarding process,
then all switch ports in the VLAN are flooded with the packet, except the port
on which the packet was received.
Example To disable the switch learning function, use the command:
dis swi le
Related Commands enable switch learning
show switch
disable switch mirror
Syntax DISable SWItch MIRRor
Description This command disables traffic mirroring on the switch. Mirrored traffic is
stopped from being sent on the switch’s mirror port. The mirror port and
mirror settings for the sources of mirror traffic remain configured. The default
state of switch mirroring is disabled.
Example To disable traffic mirroring, use the command:
dis swi mirr
Related Commands enable switch mirror
set switch mirror
set switch port
show switch
show switch port