Specifications

Switching disable mstp msti port 8-111
Software Release 2.7.3
C613-03098-00 REV A
disable mstp msti port
Syntax DISable MSTp MSTI=instance POrt={port-list|ALL}
where:
■ instance is the instance number of the specified MSTI in a range from 1 to
4094.
port-list is a port number, range (specified as n-m), or comma-separated list of
port numbers and/or ranges. Port numbers start at 1 and end at m, where m is
the highest numbered Ethernet switch port, including uplink ports.
■ Description
This command disables operation of the Multiple Spanning Tree algorithm on
the specified ports or all ports for the specified Multiple Spanning Tree
Instance. Disabled ports are placed in a discarding state and cannot forward
frames. All ports are enabled for the specified msti by default.
The MSTP module must be enabled first before any port for the specified msti
can be enabled or disabled.
The msti parameter specifies the instance number for the specified MSTI.
The port parameter specifies a list of ports to be disabled for the specified msti.
If all is specified, all of the ports on the switch will be disabled for the specified
msti.
Example To disable port 2 in MSTI5, use the command:
dis mst msti=5 po=2
Related Commands show mstp msti
show mstp msti port