Specifications

8-110 disable mstp debug Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
disable mstp debug
Syntax DISable MSTp DEBug={Msg|Pkt|State|All} MSTI={CIST|
instance|ALL} [POrt={port-list|ALL}]
where:
■ instance is the instance number of the selected MSTI in a range from 1 to
4094.
■ port-list is a port number, range (specified as n-m), or comma-separated list
of port numbers and/or ranges. Port numbers start at 1 and end at m,
where m is the highest numbered Ethernet switch port, including uplink
ports.
Description This command disables MSTP debugging for a specified MST instance (MSTI)
or all instances, or on specific port or ports.
The msti parameter specifies the instance for which the debugging mode is
disabled. If cist is specified, then debug is disabled on the CIST. If an instance is
specified, then debug is disabled on the MSTI. If ports are specified using the
port parameter, then debug will be disabled on the specified port on the
specified instance. If all is specified and the ports are specified using the port
parameter, then debug mode will be disabled on all the instances for the listed
ports.
The debug parameter specifies which debugging modes are to be disabled. If
all is specified, then all debugging modes for the instances or ports are
disabled. The other modes can be disabled independently of each other.
The port parameter specifies the ports on which the debug mode is disabled, or
all ports on the switch.
Example To disable debugging on all ports in MSTI5, use the command:
dis mst msti=5 po=all
Related Commands show mstp msti
show mstp msti port