Specifications

8-108 disable lacp Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
disable lacp
Syntax DISable LACP
Description This command disables the LACP processes on the switch. A warning
message, notification message, and log message are generated when this
command is executed. LACP is disabled by default. LACP port settings that are
changed while LACP is disabled take effect when LACP is re-enabled.
Related Commands enable lacp
show lacp
disable lacp debug
Syntax DISable LACP DEBug={MSG|PACKet|STATe|TRAce|DEV|PERSistent|
ALL}
Description This command disables the LACP debugging process, which is disabled by
default. The msg option displays the decoded form of incoming and outgoing
LACP packets. The packet option displays incoming and outgoing LACP
packets in hex. The state option displays internal state machine changes. The
trace option displays the function call tree. The dev option displays internal
support information. The persistent option enables the debug state to persist
over one reboot. If all is specified, the debugging process is disabled for all
options. The default is all.
Related Commands enable lacp debug
show lacp