Specifications

8-106 destroy switch trunk Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
destroy switch trunk
Syntax DESTroy SWItch TRunk=trunk
where trunk is a character string 1 to 15 characters long. Valid characters are
uppercase and lowercase letters, digits, the underscore, and the hyphen.
Description This command destroys a trunk group on the switch. The trunk group must be
empty, that is, it must not contain any ports.
The trunk parameter specifies the name of the trunk group. The name is not
case sensitive. The name uniquely identifies the trunk group. The specified
trunk group must already exist.
Example To destroy a trunk group called Trunk1, use the command:
dest swi tr=trunk1
Related Commands add switch trunk
create switch trunk
delete switch trunk
set switch trunk
show switch trunk