Specifications

8-102 delete switch trunk Rapier Switch Software Reference
Software Release 2.7.3
C613-03098-00 REV A
delete switch trunk
Syntax DELete SWItch TRunk=trunk POrt={port-list|ALL}
where:
■ trunk is a character string 1 to 15 characters long. Valid characters are
uppercase and lowercase letters, digits, the underscore, and the hyphen.
■ port-list is a port number, range (specified as n-m), or comma-separated list
of numbers and/or ranges. Port numbers start at 1 and end at m, where m
is the highest numbered switch Ethernet port, including uplink ports.
Description This command deletes ports from an existing trunk group on the switch.
The trunk parameter specifies the name of the trunk group. The name is not
case sensitive. The name uniquely identifies the trunk group. The specified
trunk group must already exist.
The port parameter specifies switch ports to be deleted from the trunk group.
Ports specified must be in the specified trunk group. If all is specified, then all
ports in the trunk group are deleted.
Example To delete port 3 from trunk group Trunk1, use the command:
del swi tr=trunk1 po=3
Related Commands add switch trunk
create switch trunk
destroy switch trunk
set switch trunk
show switch trunk
delete vlan bridge
Syntax DElete VLAN={vlan-name|1..4094} BRIDge
where vlan-name is a unique name for the VLAN 1 to 32 characters long. Valid
characters are uppercase and lowercase letters, digits, the underscore, and the
hyphen. The vlan-name cannot be a number or all.
Description This command deletes a bridge attachment from the specified VLAN.
Examples To attach the training VLAN to the bridge use the command:
del vlan=training brid
Related Commands add vlan bridge
show bridge
show vlan