Install guide

28 Release Note
Rapier Switch Software Release 2.1.0
C613-10200-01 Rev A
Figure 10: VLANS with untagged ports
To display the VLANs configured on the switch, use the command:
SHOW VLAN[={vlanname|1..4094|ALL}]
Figure 11: Example output from the SHOW VLAN command.
.
VLAN Information
------------------------------------------------------------
Name : default
Identifier : 1
Untagged Ports : 1-10, 13
Tagged Ports : none
Spanning Tree : default
Attachments:
Module Protocol Format Discrim MAC address
-----------------------------------------------------------
IP IP Ethernet 0800 -
IP AR Ethernet 0806 -
-----------------------------------------------------------
Table 8: Parameters displayed in the output of the SHOW VLAN command
Parameter Meaning
Name The name of the VLAN.
Identifier The numerical VLAN Identifier of the VLAN.
Untagged Ports A list of untagged ports that belong to the VLAN.
Training VLAN
Marketing VLAN
411
Port 14
VLAN-FG1
Port 15
Port 16
Port 1
Port 2
Port 3
Switch