Install guide

Software Release 2.6.4 5
Software Release 2.6.4
C613-10404-00 REV A
Overview of New Features
Table 2 summarises the new features and enhancements in Software Release
2.6.4 by product series. Each new feature and enhancement is described in the
following sections.
Stacking was first released in Software Release 2.6.2, and SNMPv3 was first released in
Software Release 2.6.3 on AT-8700XL, AT-8800, Rapier, and Rapier i Series switches.
Both features are now available on AT-8600 Series switches.
Table 2: New features and enhancements in Software Release 2.6.4 by product
series
AT-8600 AT-8700XL AT-8800 RAPIER RAPIER I
NEBS Compliant Models
!!
Importing BGP routes into OSPF
!!!!!
SNMPv3
!!!!!
Stacking
!!!!!
ICMP Router Discovery Advertisements
!!!!!
Support for Long File Names (DOS 28.3)
!!!!!
Testing Asynchronous and Switch Ports
!!!!!
Interrupting Text Flow with the CLI
!!!!!
Disable 10/100 Ports at the Hardware Level
!!!!!
Specifying the Mode of Operation When IGMP Snooping is
Enabled
!!!!!
IP Route Filter Changes to Protocol Parameter
!!!!!
Remote Security Officer (RSO) Login
!!!!!
Enable IPV6 MLD Interface Command
!!!
Text Message at Login (Welcome banner)
!!!!!
Private VLANs
!!
Probing IP Addresses
!!!!!
Virtual Bridge (VLAN) MIB
!!!!!
Valid Values for IPv6 Router Advertisement AdvRetransTimer
!!!
Valid Characters for File Names - Show File and Delete File
Commands
!!!!!
Extended Show Debug Command
!!!!!
Extended Syslog Format
!!!!!
TACACS+ Authentication and Telnet
!!!!!
Adopting the VRRP IP Address
!!!!!