Install guide

34 Release Note
Software Release 2.6.4
C613-10404-00 REV A
For more information, see the Firewall chapter of the Software Reference.
NAT Type The type of NAT configuration associated with the IP address:
Int Based - The address (range) was specified by an interface-
based NAT configured with the add firewall policy
nat command
Rule - The address (range) was specified by a NAT rule
configured by the add firewall policy rule
command, where the ACTION parameter was
specified as NAT
Int The private interface associated with the NAT configuration. If the
NAT Type is Int based, this is the private interface specified by the
INTERFACE parameter in the add firewall policy nat command.
If the NAT Type is Rule, this is the interface to which the rule is
attached.
If this is a private interface, a dash indicates that the rule is
attached to a public interface (see the Gbl Int parameter).
Gbl Int The public interface associated with the NAT configuration. If the
NAT Type is Int based, this is the public interface specified by the
GBLINTERFACE parameter in the add firewall policy nat
command.
If the NAT Type is Rule, this is the interface to which the rule is
attached.
if this is a public interface, a dash indicates that the rule is attached
to a private interface (see the Int parameter).
Rule The number of the rule associated with this entry. When the NAT
Type is Int based, no value is displayed.
Table 10: Parameters in the output of the show firewall arp command (Continued)
Parameter Meaning