Install guide

Software Release 2.6.4 3
Software Release 2.6.4
C613-10404-00 REV A
Introduction
Allied Telesyn announces the release of Software Release 2.6.4 for the AT-8600,
AT-8700XL, AT-8800, Rapier, and Rapier i Series switches. To see which new
features and enhancements apply to each product type, see Overview of New
Features on page 5.
This Release Note describes:
■ important factors you need to consider when upgrading to Software
Release 2.6.4 from an earlier software release, in Upgrading to Software
Release 2.6.4 on page 3
■ the names of the software release, GUI and help files for this release, in
Upgrading to Software Release 2.6.4 on page 3
■ the new and existing hardware platforms supported by Software Release
2.6.4
■ the new features in Software Release 2.6.4 since Software Release 2.6.1
This Release Note should be read in conjunction with the Quick Install Guide,
User Guide, Hardware Reference, and Software Reference for your switch.
These documents can be found on the Documentation and Tools CD-ROM
packaged with your switch, or at:
www.alliedtelesyn.co.nz/documentation/documentation.html
WARNING: Information in this Release Note is subject to change without
notice and does not represent a commitment on the part of Allied Telesyn
International. While every effort has been made to ensure that the information
contained within this document and the features and changes described are
accurate, Allied Telesyn International can not accept any type of liability for
errors in, or omissions arising from the use of this information.
Upgrading to Software Release 2.6.4
Software Release 2.6.4 is available as a flash release that can be downloaded
directly from the Software Updates area of the Allied Telesyn web site at:
www.alliedtelesyn.co.nz/support/updates/patches.html
Software releases must be licenced and require a password to activate. To
obtain a licence and password, contact your authorised Allied Telesyn
distributor or reseller.
The files included in this software release are shown in Table 1.
Table 1: File names for Software Release 2.6.4
Product name Software release file GUI resource file CLI help file
AT-8624T/2M sr-264.rez dsr24e10.rsc SR-264A.HLP
AT-8724XL 87-264.rez d8724e04.rsc 8700264A.HLP
AT-8748XL 87-264.rez d8748e04.rsc 8700264A.HLP
AT-8824 86s-264.rez d8824e10.rsc 8800264A.HLP