Install guide

22 Release Note
Software Release 2.6.4
C613-10404-00 REV A
Figure 3: Example output from the SHOW VLAN command.
Configuration Example
To create vlan2 with two groups of private ports (3-5 and 6-9) connected to an
uplink trunk group (ports 21-24):
1. Create vlan2, making it private.
create vlan=vlan2 vid=2 private
2. Add the uplink trunk group to the VLAN. The ports must already be
trunked together.
add vlan=vlan2 port=21-24 uplink
3. Define the groups and add their ports to vlan2.
add vlan=vlan2 port=3-5 group
add vlan=vlan2 port=6-9 group
VLAN Information
---------------------------------------------------------------------------
Name ............... default
Identifier ......... 1
Status ............. static
Private VLAN ....... No
Untagged ports ..... 1,3-23
Tagged ports ....... None
Spanning Tree ...... default
Trunk ports ........ None
Mirror port ........ None
Attachments:
Module Protocol Format Discrim MAC address
-------------------------------------------------------------------
GARP Spanning tree 802.2 42 -
IP IP Ethernet 0800 -
IP ARP Ethernet 0806 -
-------------------------------------------------------------------
Name ............... vlan2
Identifier ......... 2
Status ............. dynamic
Private VLAN ....... Yes
Untagged ports ..... 2,24
Tagged ports ....... None
Spanning Tree ...... default
Trunk ports ........ None
Mirror port ........ None
Attachments:
Module Protocol Format Discrim MAC address
-------------------------------------------------------------------
GARP Spanning tree 802.2 42 -
-------------------------------------------------------------------
Private Uplink:
Uplink ports ...... 21-24
Private Groups:
Group ports ...... 3-5
Group ports ...... 6-9
--------------------------------------------------------------------