Install guide

90 IP Security (IPsec) Enhancements Release Note
Software Version 2.9.1
C613-10486-00 REV C
show debug
Syntax SHow DEBug [STAck|FULl|IPSec]
Description This command executes a specific sequence of show commands to produce
output useful for debugging. The new ipsec parameter runs specific
commands useful for debugging IPsec or ISAKMP problems.
Note that output depends on the router or switch’s mode and user privilege as
indicated in the following table.
Commands for show debug ipsec
‡ show system (with current config file)
show file
show install
‡ show feature
show release
‡ show config dynamic
show buffer scan
show cpu
show log
show exception
show ipsec policy sabundle
§ show ipsec sa=sa
show ipsec sa counters
show ipsec counters
¶ show ipsec policy=policy counters
show enco
show enco channel
† show enco channel=channel
† show enco channel=channel counters
show enco counters
show isakmp sa
show isakmp exchange
show isakmp exchange detail
show isakmp sa detail
show isakmp counters
show ffile check
‡ When the router or switch is in security mode, this command produces output only when
the user has security officer privilege.
§ Selects all current IPsec SAs.
¶ Selects all IPsec policies configured with action=ipsec.
† Selects all ENCO channels in use.