Install guide

Software Version 2.9.1 89
Software Version 2.9.1
C613-10486-00 REV C
Command Changes
The following table summarises the modified commands:
Command Reference Updates
This section describes the changed portions of modified commands and output
screens. The new parameters, options, and fields are shown in bold.
create ipsec bundlespecification
Syntax CREate IPSec BUNDlespecification=bundlespecification-id
KEYmanagement={ISakmp|MAnual} STRING="bundle-string"
[EXPIRYKbytes=1..4193280] [EXPIRYSeconds=300..31449600]
Description This command creates a bundle specification with the specified identification
number in the IPsec Security Policy Database (SPD). The maximum value you
can set for expirykbytes is now 4193280.
set ipsec bundlespecification
Syntax SET IPSec BUNDlespecification=bundlespecification-id
[EXPIRYKbytes=1..4193280] [EXPIRYSeconds=300..31449600]
Description This command modifies the bundle specification with the specified
identification number in the IPsec Security Policy Database (SPD). The
maximum value you can set for expirykbytes is now 4193280.
Command Change
create ipsec bundlespecification Modified expirykbytes parameter
set ipsec bundlespecification Modified expirykbytes parameter