Install guide

80 Firewall Enhancements Release Note
Software Version 2.9.1
C613-10486-00 REV C
show firewall policy
Syntax SHow FIREwall POLIcy[=policy-name] [COUnter]
[RUle=rule-id[-rule-id]] [SUMmary]
Description This command displays detailed information about the specified policy or all
policies. It now includes a field summarising the number of limit rules
configured for each policy (Figure 13, Table 10).
Figure 13: Example output from the show firewall policy command for a policy that has
limit rules
show firewall policy limitrule
Syntax SHow FIREwall POLIcy=policy-name
LIMitrule[=rule-id[-rule-id]] [DETail]
Description This command displays detailed information about the specified or all limit
rules for the specified policies (Figure 14, Table 11 on page 82).
Policy : Office
TCP Timeout (s) ................... 3600
UDP Timeout (s) ................... 1200
Other Timeout (s) ................. 1200
ICMP Unreachable Timeout (s) ...... 0
TCP Handshake Timeout Mode ........ Normal
MAC Cache Timeout (m) ............. 1440
RADIUS Limit ...................... 100
Accounting ........................ disabled
Enabled Logging Options ........... none
Enabled Debug Options ............. none
Enabled Debug Modes ............... none
Enabled Debug IP Address .......... none
Identification Protocol Proxy ..... enabled
Enabled IP options ................ none
Enhanced Fragment Handling ........ none
Enabled ICMP forwarding ........... none
Receive of ICMP PINGS ............. enabled
Number of Notifications ........... 1
Number of Deny Events ............. 28
Number of Allow Events ............ 172
Number of Active TCP Opens ........ 3
Number of Active Sessions ......... 31
Cache Hits ........................ 812
Discarded ICMP Packets ............ 19
SMTP Domain ....................... not set
FTP Data Port ..................... RFC enforced
TCP Setup Proxy ................... enabled
Number of Limitrules .............. 2
.
.
.
Table 10: New parameters in the output of the show firewall command
Parameter Meaning
Number of Limitrules The number of limit rules configured for the policy.