Install guide

62 BGP Enhancements Release Note
Software Version 2.9.1
C613-10486-00 REV C
Command Reference Updates
This section describes the changed portions of modified output screens. The
new fields are shown in bold.
show bgp backoff
Syntax SHow BGP BACkoff
Description This command displays BGP backoff details (Figure 11, Table 8).
Figure 11: Example output of the show bgp backoff command
BGP Backoff Stats:
Stat Value
----------------------------------
command status ENABLED
backOff state PEER DISABLED
total hist backOffs 5
total backOffs 0
total backOff Limit 0
consecutive backOffs 0
consecutive backOffs limit 5
base Timeout 10
Timeout multiplier 100%
Timeout step 1
Timeout length (sec) 10
Mem Upper Threshold Value 95%
Mem Upper Notify TRUE
Mem Lower Threshold Value 90%
Mem Lower Notify FALSE
Current Mem use 84%
----------------------------------
Table 8: New and modified parameters in the output of the show bgp backoff command
Parameter Meaning
command status Overall status of the BGP backoff; either ENABLED or
DISABLED.
backOff state The current status of BGP backoff.
NORMAL displays when BGP backoff is not active and
BGP is processing normally.
BACKED OFF displays when system memory use has
reached its upper threshold and BGP processing is
halted.
PEER DISABLED displays when the consecutive or total
backoff limits have been reached and the peers have
been disabled. This also displays if BGP backoff is
enabled, but no peer has yet been discovered.
DISABLED displays when the user has disabled backoff
functionality.